HVAC Contractor in Noblesville, Fishers & Westfield, IN and the Surrounding Areas

Save On A Furnace Repair With Some DIY Steps

Nothing can be more nightmarish than waking up shivering in the middle of a cold night. It’s a horrible issue that happens when your furnace is not working correctly or not working at all. With a little DIY experience, you can troubleshoot and repair your furnace. It is always recommended to have a checklist for your furnace repair in Indianapolis to avoid such problems. Today we got you something that will make you confident to tackle some furnace repairs.

8 Common Furnace Fixes You Can DIY

Your Thermostat Is Not Working 

If the thermostat batteries are out of charge, you need to change them before concluding that your furnace has broken down. If your thermostat is wired to your house’s electrical system, you may call a professional furnace repair in Indianapolis to check the wiring.

You Are Not Getting Enough Heat 

There can be many reasons for this to occur. First, check if the thermostat is set to “heat.” You need to check the fuse of your furnace if it’s malfunctioning. Don’t forget to off the breaker before touching it.

You Are Getting Interrupted Air Flow 

A furnace can struggle to circulate enough heat due to clogged filters. This is a simple yet essential furnace maintenance step to replace the furnace filter regularly. It helps you to get uninterrupted air throughout your home.

Your Furnace Is Not Operating 

When you face such a problem, you must check the safety switch on the furnace door. The door must be in place to keep the switch activated. If you face any problem, you might need to install a new safety switch.

Keep the Area Around Your Furnace Clean 

Make sure that year furnace is not established in a cluttered area. Avoid storing any flammable substances around your furnace.

Look at The Burner Flame

Due to contamination, sometimes your furnace burner may fail. You need to keep the burners free from debris. If your burner is clean, you will experience blue and even flame, and if your burners are dirty, you can see the yellow frame. Clean the burners and replace them if the existing one is in poor condition.

Oil the Furnace 

If you’re making your furnace ready for the winter, make sure all the heating system components are clean and working correctly. Oiling the furnace blower can extend the life of your furnace. You can turn off the circuit breaker remove the access panel, locate the blower motor, locate the oil ports, and squeeze two to three drops of oil into each port.

Check the Electric Ignition 

Your gas furnace functions with the pilot light or may have an electric control. A faulty ignition system can reduce the ability of your furnace to work properly. If there is any clog in the heating system, it can result in your pilot to fail. By following the steps recommended by the manufacturer in the user manual, You can troubleshoot if there is any problem in the electric ignition.

 

Dutch Heating and Cooling LLC is one of the best AC contractor in Indianapolis provide furnace repair in Indianapolis to ensure your furnace is working at its peak efficiency. If you find anything wrong with your furnace that you can’t control by yourself, reach out to our furnace expert without wasting time.